Small rod transverse ripple compensator

Small rod transverse ripple compensator
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

The corrugated bar transverse corrugated compensator is also called corrugated expansion joint and corrugated expansion joint. This product is composed of two-stage bellows, intermediate nozzles and small pull rods with limited nuts. It absorbs the transverse displacement in any plane of the pipe system and the axial displacement at the same time. The small rod can not withstand internal pressure thrust.

Matters needing attention in installation and use

1, if the user does not use a small pull rod, please note it when ordering.

2. If the user needs a small pull rod, it is necessary to loosen the nut and leave the ceiling (or support plate) a distance after installation (the value is determined by the amount of compensation from the direction).

3. If the actual compensation is greater than the prescribed value on the sample (life less than 1000 times), the product must be removed after installation.

Main data

公稱
通徑
DN
壓力 0.6Mpa
壓力 1.0Mpa
壓力 1.6Mpa
you效面積 A
cm 2
焊接端管
d × t
mm
總長
L
mm
重量
kg
F/H
軸向位移 / 軸向鋼度 mm/
(N/mm)
橫向位移 / 橫向鋼度 mm/
(N/mm)
軸向位移 / 軸向鋼度 mm/
(N/mm)
橫向位移 / 橫向鋼度 mm/
(N/mm)
軸向位移 / 軸向鋼度 mm/
(N/mm)
橫向位移 / 橫向鋼度 mm/
(N/mm)
100
32/210
96/8.0
28/252
86/9.6
26/302
Dec-78
154
0.8 × 4
1000
30
200/2.0
180/2.5
162/3.1
1500
36
306/0.89
275/1.1
248/1.3
2000
41
411/0.50
370/0.6
333/0.75
2500
47
125
33/170
83/18
31/204
78/21.6
29/245
75/25.9
180
33 × 4
1000
39
115/6.8
109/8.2
103/9.8
1500
43
198/3.5
188/4.2
178/5.0
2000
51
269/1.8
255/2.2
242/2.6
2500
62
150
32/290
65/21
30/348
61/25.2
27/417
58/30.2
299
59 × 4.5
1000
42
136/5.4
129/6.5
122/7.8
1500
53
107/2.4
197/2.9
186/3.5
2000
63
279/1.4
265/1.68
251/2.1
2500
74
200
48/326
72/47
43/391
68/56.4
40/469
65/70.5
531
19 × 6
1000
72
160/11
152/13.2
144/16.5
1500
89
250/5.0
237/6.0
225/7.5
2000
106
341/2.8
324/3.4
291/4.1
2500
123
250
46/400
127/20
43/480
114/25
38/576
108/30
774
73 × 8
1500
121
199/9.0
179/10.8
170/13.5
2000
150
271/5.0
257/6.0
231/7.5
2500
178
343/3.2
325/3.8
293/4.6
3000
206
300
59/336
134/25
56/403
127/30
50/483
121/36
1069
25 × 8
1500
146
213/11
202/13.2
192/15.8
2000
179
292/6.0
277/7.2
263/8.6
2500
213
372/3.8
353/4.6
335/5.4
3000
246
350
58/366
107/40
55/402
102/44
52/442
96/48
1263
77 × 8
1500
171
178/16
169/18
161/22
2000
208
250/8.5
237/10
226/12
2500
245
322/5.3
306/6.9
290/9.6
3000
282
400
57/415
92/58
54/48
87/63
51/492
83/69
1612
26 × 8
1500
192
154/23
142/25
135/27
2000
235
215/12
204/13
196/15
2500
278
278/7.7
264/9
250/11
3000
321
450
55/415
81/80
52/456
77/88
49/484
73/96
1995
78 × 8
1500
218
135/32
128/35
122/38
2000
268
189/17
180/19
171/21
2500
319
243/11
230/12
218/13
3000
370
500
90/746
36/241
72/895
32/260
58/984
29/281
2625
29 × 10
1400
535
68/89
62/96
56/104
1700
581
102/42
92/45
83/49
2000
627
126/28
113/30
102/32
2200
658
166/18
149/19
134/21
2500
704
198/12
178/13
160/14
2800
750
600
94/820
42/208
85/886
38/224
75/948
34/242
3590
30 × 10
1500
648
71/102
64/110
58/118
1800
702
106/47
95/51
86/55
2200
775
135/30
121/32
111/35
2500
830
168/21
156/23
141/25
2800
884
199/14
183/15
168/17
3200
957
注:大于DN600的產品可定制加工

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.Small rod transverse ripple compensatorPlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!