ZCZP universal solenoid valve

ZCZP universal solenoid valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

The ZCZP universal solenoid valve is suitable for executing the temperature automatic control with steam as heating medium. It can be used for automatic control and remote control of steam pipes of steam heaters, radiators, dryers and other steam equipments, as well as all kinds of automatic temperature controllers, steam shaping machines, steam engines, steam humidifiers and other complete sets of equipment. Automatic control system widely used in dyeing, textile, printing and dyeing, food, medicine, cigarettes, cement products, petrochemical, metallurgy and other departments

Structural characteristics

1. Heat Resistance: Special high-temperature resisting electrical materials and sealing materials are used in electromagnetic parts and sealing parts, and various heat insulation measures are applied.

2. Wear-resistant: Material selection is reasonable, the valve cup and guide sleeve skillfully use the fluid lubrication, reduce wear.

3. Condensation resistance: condensate water in steam pipeline is an important factor affecting the operation of steam solenoid valve, the valve is not affected by condensate water.

Structure principle

This valve is a pilot type two solenoid valve which is composed of two main parts, the secondary valve and the main valve. The main valve is controlled by the opening and closing of the vice valve. According to the different state of switch in power failure, it can be divided into normally closed solenoid valve and normally open solenoid valve. Normally closed solenoid valve, in the section point constant position, the secondary valve is closed, the main valve is open circuit, when the electrical signal into the guide valve coil, the movable iron core by electromagnetic force suction open the secondary valve port, the main valve cup pressure guide speed disappears, the medium pressure will be the main valve cup support, open the main valve, the working medium can flow. But when the signal disappears, the movable iron core resets, closes the secondary valve port, and the working medium enters the valve from the balance hole. When the pressure tends to balance, the valve cup moves down by the main valve spring, the weight of the valve cup and the pressure of the medium, and the valve has a closed state. Normally open solenoid valve, when the power is cut off regularly, there is spring action, the vice valve port opens, and the main valve flows. When the signal enters the secondary valve coil, the movable iron core should be sucked down by electromagnetic force. When the pressure tends to balance, the valve cup moves down by the main valve spring, the cup weight and the medium pressure, and the valve is closed. When the main valve is cut off, the electromagnetic force disappears, the secondary valve is opened, the pressure in the main valve cup disappears rapidly, the medium pressure will be on the main valve cup holder, open the main valve port, medium flow, the valve is open.

Model description

Main technical parameters


介質種類
蒸汽、常溫液體、氣體等、高溫液體、氣體
介質溫度(℃)
≤200
工稱壓力(Mpa)
1.6
電源電壓
AC220V·DC24V其余規格可作特殊訂貨
公稱通徑(mm)
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
流量系數 Kv值
2.8
5
8.5
12
18
28
45
70
110
180
250
600
870
1000
1320
工作壓力(Mpa)
0.04~1.6
0.1~1.6
功率 VA
40 30
50
閥體材質
鑄鋼和不銹鋼


Main dimensions


公稱通徑
DN
內螺紋連接
法蘭連接
內螺紋
外形尺寸
外形尺寸
法蘭尺寸
G
H
L
H
L
D
D1
D2
n-d
b
f
15
1/2
148
92
176
130
95
65
46
4-?14
14
2
20
3/4
148
92
181
150
105
75
56
4-?14
16
2
25
1
148
110
210
160
115
85
65
4-?14
16
3
32
1 1/4
182
120
221
180
140
100
76
4-?18
18
3
40
1 1/2
182
140
230
200
150
110
84
4-?18
18
3
50
2″
192
162
252
230
165
125
99
4-?18
20
3
65
260
290
185
145
118
4-φ18
20
3



80
260
310
200
160
132
4-φ18
20
3



100
290
350
220
180
156
4-φ18
22
3



125
365
400
250
210
184
4-φ18
22
3



150
400
480
285
240
211
4-φ22
24
3



200
443
600
340
295
266
4-φ26
24
3



250
493
750
395
350
319
4-φ26
26
4



300
549
850
445
400
370
4-φ26
28
4



350
600
980
520
470
429
4-φ26
30
4




The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZCZP universal solenoid valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!